The Screw,close Tolerance, cataloged under National Stock Number 5305-01-253-7122, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is The Boeing Company Div Defense. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-253-7122 |
| Primary Part Number | ST3M713-6D16 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | The Boeing Company Div Defense |
| Status | ACTIVE |
| Fastener Length | 1.376 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM IN |
| Grip Diameter | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.253 INCHES MINIMUM AND 1.293 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HT4048-6D16 | Hi-Shear Corporation (USA) |
| ST3M713-6D16 PRIMARY | The Boeing Company Div Defense (USA) |
| HT4048-6D16 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| HT4048-6D16 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| Reference | Meaning |
|---|---|
| HT4048-6D16 | C/1 Advisory reference — outside the item-of-supply concept Howmet Global Fastening Systems Inc |
| HT4048-6D16 | 5/9 Secondary reference U.S. Government activity |
| ST3M713-6D16 | 5/9 Secondary reference U.S. Government activity |
| HT4048-6D16 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| HT4048-6D16 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-253-7122 is a Screw,close Tolerance, manufactured by The Boeing Company Div Defense, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-253-7122 has 4 manufacturer part numbers on file: HT4048-6D16 (Hi-Shear Corporation), ST3M713-6D16 (The Boeing Company Div Defense), HT4048-6D16 (Sps Technologies, Llc Dba PB Fasteners), HT4048-6D16 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc).
Key specifications for ST3M713-6D16: Fastener Length: 1.376 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.366 INCHES MINIMUM AND 0.416 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.