The Screw,wood, cataloged under National Stock Number 5305-01-251-0765, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-251-0765 |
| Item Name | Screw,wood |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Nonmachine Nominal Thread Diameter | 0.216 INCHES0.216 INCHES IN |
| Fastener Length | 0.950 INCHES MINIMUM AND 0.950 INCHES MINIMUM AND 1.000 INCHES MAXIMUM1.000 INCHES MAXIMUM IN |
| Nonmachine Thread Style | WOOD SCREW (TYPE WD)WOOD SCREW (TYPE WD) |
| Head Style | FLAT COUNTERSUNKFLAT COUNTERSUNK |
| Nondefinitive Spec/std Data | 1 TYPE AND 2S STYLE |
| Surface Treatment | CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH55000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOTSLOT |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM82.0 DEGREES MAXIMUM |
| Material | STEEL COMP 1010 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1108 OR STEEL COMP 1109 OR STEEL COMP 1110 OR STEEL COMP 1116 OR STEEL COMP 1117 OR STEEL COMP 1118 OVERALL |
| Head Diameter | 0.389 INCHES MINIMUM AND 0.389 INCHES MINIMUM AND 0.438 INCHES MAXIMUM0.438 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-111 | 4/1 Identification reference U.S. Government activity |
| MS35494-100 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-251-0765 is a Screw,wood, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-251-0765: Nonmachine Nominal Thread Diameter: 0.216 INCHES0.216 INCHES IN; Fastener Length: 0.950 INCHES MINIMUM AND 0.950 INCHES MINIMUM AND 1.000 INCHES MAXIMUM1.000 INCHES MAXIMUM IN; Nonmachine Thread Style: WOOD SCREW (TYPE WD)WOOD SCREW (TYPE WD); Head Style: FLAT COUNTERSUNKFLAT COUNTERSUNK. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.