The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-246-9244, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-246-9244 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN |
| Head Height | 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Fastener Length | 1.250 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Special Test Features | SPECIAL QUALITY CONTROL TESTING |
| Thread Length | 1.125 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN |
| Hardness Rating | 80.0 ROCKWELL B MINIMUM OVERALL |
| Criticality Code Justification | ZZZY |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 30000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Test Data Document | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| Head Diameter | 0.550 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | S |
| Reference | Meaning |
|---|---|
| 115J756ITEM23 | 5/9 Secondary reference Bfm Energy Products Corp |
| 115J756-25 | C/1 Advisory reference — outside the item-of-supply concept Integral Aerospace, Llc Dba Pcx Aerosystems - Santa Ana Div Integral Aerospace, Llc Dba Pcx Aerosystems - Santa Ana |
| LL-HX4-9305 | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| 115J756-25 | 3/9 Design control — primary reference Bfm Energy Products Corp |
NSN 5305-01-246-9244 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-246-9244: Width Across Flats: 0.312 INCHES MINIMUM AND 0.316 INCHES MAXIMUM IN; Head Height: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Fastener Length: 1.250 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.