The Screw,machine, cataloged under National Stock Number 5305-01-239-1316, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-239-1316 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Thread Length | 0.169 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.112 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L |
| Internal Drive Style | SLOT |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 40 |
| Thread Series Designator | UNF |
| Head Diameter | 0.195 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NBSHB09004 | 5/2 Secondary reference U.S. Government activity |
| N58P9004-1 | 3/9 Design control — primary reference General Electric Co Materials Information Services |
| N58P9004 | 5/9 Secondary reference General Electric Co Materials Information Services |
NSN 5305-01-239-1316 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-239-1316: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Thread Length: 0.169 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.112 INCHES IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.