The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-237-6732, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Mcmaster-Carr Supply Co. Government technical data includes 12 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-237-6732 |
| Primary Part Number | 92198A623 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Mcmaster-Carr Supply Co |
| Status | ACTIVE |
| Head Height | 0.234 INCHES NOMINAL IN |
| Fastener Length | 0.875 INCHES NOMINAL IN |
| Thread Length | 0.750 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.562 INCHES NOMINAL IN |
| Minimum Tensile Strength | 90000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 16 |
| Material | STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 92198A623 PRIMARY | Mcmaster-Carr Supply Co (USA) |
NSN 5305-01-237-6732 is a Screw,cap,hexagon Head, manufactured by Mcmaster-Carr Supply Co, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-237-6732 has 1 manufacturer part number on file: 92198A623 (Mcmaster-Carr Supply Co).
Key specifications for 92198A623: Head Height: 0.234 INCHES NOMINAL IN; Fastener Length: 0.875 INCHES NOMINAL IN; Thread Length: 0.750 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.375 INCHES IN. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.