The Screw,machine, cataloged under National Stock Number 5305-01-231-3257, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Honeywell International Inc Dba Honeywell. Government technical data includes 13 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-231-3257 |
| Primary Part Number | 6732-0205 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Honeywell International Inc Dba Honeywell |
| Status | ACTIVE |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Thread Length | 0.209 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.086 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 56 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | 3608009 FSCM 27914 MFR REF SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 6732-0205 PRIMARY | Honeywell International Inc Dba Honeywell (USA) |
NSN 5305-01-231-3257 is a Screw,machine, manufactured by Honeywell International Inc Dba Honeywell, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-231-3257 has 1 manufacturer part number on file: 6732-0205 (Honeywell International Inc Dba Honeywell).
Key specifications for 6732-0205: Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Thread Length: 0.209 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.086 INCHES IN; Head Style: FLAT COUNTERSUNK. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.