The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-231-0602, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Mcmaster-Carr Supply Co. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-231-0602 |
| Primary Part Number | 91292A117 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Mcmaster-Carr Supply Co |
| Status | ACTIVE |
| Width Across Flats | 3.0 MILLIMETERS NOMINAL MM |
| Head Height | 3.88 MILLIMETERS MINIMUM AND 4.00 MILLIMETERS MAXIMUM MM |
| External Thread Tolerance Class | 6G G |
| Fastener Length | 12.0 MILLIMETERS NOMINAL MM |
| Thread Pitch in Millimeters | 0.7 |
| Thread Length | 10.6 MILLIMETERS MINIMUM AND 12.0 MILLIMETERS MAXIMUM MM |
| Material Document and Classification | DIN 912 304(A2) 18-8 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 4.0 MILLIMETERS MM |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Minimum Tensile Strength | 75000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Material | STEEL COMP 304 OVERALL |
| Thread Series Designator | M |
| Head Diameter | 5.50 MILLIMETERS NOMINAL MM |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 91292A117 PRIMARY | Mcmaster-Carr Supply Co (USA) |
NSN 5305-01-231-0602 is a Screw,cap,socket Head, manufactured by Mcmaster-Carr Supply Co, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-231-0602 has 1 manufacturer part number on file: 91292A117 (Mcmaster-Carr Supply Co).
Key specifications for 91292A117: Width Across Flats: 3.0 MILLIMETERS NOMINAL MM; Head Height: 3.88 MILLIMETERS MINIMUM AND 4.00 MILLIMETERS MAXIMUM MM; External Thread Tolerance Class: 6G G; Fastener Length: 12.0 MILLIMETERS NOMINAL MM. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.