The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-230-5193, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-230-5193 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN |
| Fastener Length | 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.000 INCHES MINIMUM IN |
| Hardness Rating | 80.0 ROCKWELL B NOMINAL OVERALL |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 4 TYPE |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 70000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP 303 OR STEEL COMP 304 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.720 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-86 | 4/1 Identification reference U.S. Government activity |
| MS24672-30 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-230-5193 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-230-5193: Width Across Flats: 0.218 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN; Fastener Length: 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 1.000 INCHES MINIMUM IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.