The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-229-6330, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-229-6330 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| Fastener Length | 3.185 INCHES MINIMUM AND 3.203 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 3.185 INCHES MINIMUM AND 3.203 INCHES MAXIMUM IN |
| Material Document and Classification | SAE GR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Minimum Yield Strength | 33000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL OVERALL |
| Thread Series Designator | UNF |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-85ATYIST10SGR2-1/4-28X3-3/8 | 5/9 Secondary reference U.S. Government activity |
| 13218E0526-292 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-229-6330 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-229-6330: Head Height: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN; Fastener Length: 3.185 INCHES MINIMUM AND 3.203 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 3.185 INCHES MINIMUM AND 3.203 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.