PartsTable TECHNICAL DATA SHEET
NSN 5305-01-228-4689Government record, cited

Screw, Cap, Socket Head5305-01-228-4689

NSN 5305-01-228-4689 · NIIN 012284689 · Part number 3176207-B-259
Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 10001
Government record, cited
NSN 5305-01-228-4689 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-228-4689. Manufacturer of record part number: 3176207-B-259.
Also searched as  5305-01-228-4689 · 5305012284689 · NIIN 012284689 · 01-228-4689 · FSC 5305 Screws · CAGE 10001 · 3176207-B-259 · FF-S-86 · 20097H3-8C-12Z
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Width Across Flats: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
  • Head Height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
  • Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: ASTM B633,TYPE 2,CLASS 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
  • Supplementary Features: MEETS ANSI B18.3,TABLES 1 AND 1A EXCEPT DRILLED HEAD A
  • Hardness Rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
Identification
  • NSN: 5305-01-228-4689
  • NIIN: 012284689
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 3176207-B-259
  • Manufacturer: Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-228-4689, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier. Government technical data includes 26 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-228-4689
Primary Part Number3176207-B-259
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
ManufacturerNavair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier
StatusACTIVE
Width Across Flats0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN
Head Height0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Fastener Length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationASTM B633,TYPE 2,CLASS 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Supplementary FeaturesMEETS ANSI B18.3,TABLES 1 AND 1A EXCEPT DRILLED HEAD A
Hardness Rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
Hole Configuration StyleROUND INTERNAL HEXAGON
Material Document and ClassificationASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.500 INCHES IN
Head StyleFLAT CHAMFER
Thread DirectionRIGHT-HAND
Specification/standard Data81348-FF-S-86 GOVERNMENT SPECIFICATION
Departure From Cited DocumentFF-S-86,PARAGRAPH 3.5.2,DRILLED HEAD
Nondefinitive Spec/std Data6 TYPE AND 1/2-13UNRC SIZE
Surface TreatmentCHROMATE ZINC OVERALL
Minimum Tensile Strength24100 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Thread Class3A A
Thread Quantity Per Inch13
MaterialSTEEL UNS K03104 OVERALL
Hole Quantity6
Thread Series DesignatorUNRC
Hole TypeDRILLED
Hole Diameter0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
Head Diameter0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
3176207-B-259 Bae Systems Land & Armaments L.p. (USA)
3176207-B-259 PRIMARY Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier (USA)
20097H3-8C-12Z PRIMARY Sps Technologies, Llc Dba PB Fasteners (USA)
Reference documents
ReferenceMeaning
FF-S-86 4/1 Identification reference
U.S. Government activity

Frequently Asked Questions

What is NSN 5305-01-228-4689?

NSN 5305-01-228-4689 is a Screw,cap,socket Head, manufactured by Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-228-4689?

NSN 5305-01-228-4689 has 3 manufacturer part numbers on file: 3176207-B-259 (Bae Systems Land & Armaments L.p.), 3176207-B-259 (Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier), 20097H3-8C-12Z (Sps Technologies, Llc Dba PB Fasteners).

What are the specifications of 3176207-B-259?

Key specifications for 3176207-B-259: Width Across Flats: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN; Head Height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN; Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM B633,TYPE 2,CLASS 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL. 26 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-228-4689 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com