The Screw,machine, cataloged under National Stock Number 5305-01-222-9077, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-222-9077 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.242 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 1.440 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| Thread Length | 1.417 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.375 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 1 TYPE AND 5S STYLE |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 24 |
| Hole Quantity | 1 |
| Thread Series Designator | UNF |
| Head Hole Configuration Style | ROUND |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Head Diameter | 0.590 INCHES MINIMUM AND 0.622 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE OR MIL-C-81562 TY 2 CL 3 MIL SPEC 2ND TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| MS35266-113 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-222-9077 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-222-9077: Head Height: 0.242 INCHES MINIMUM AND 0.253 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 1.440 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN; Thread Length: 1.417 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.