The Screw,machine, cataloged under National Stock Number 5305-01-219-5930, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-219-5930 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM |
| Fastener Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Screw Material Document and Classification | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE AND IL-S-5000 FED STD 10TH MATERIAL RESPONSE AND IL-S-6049 MIL SPEC 10TH MATERIAL RESPONSE |
| Thread Length | 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| Nominal Thread Diameter | 0.1640 INCHES IN |
| Head Style | PAN |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 4140 OR STEEL COMP 4340 OR STEEL COMP 8740 |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNJC |
| Head Diameter | 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TYPE2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| NAS602-5B | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-219-5930 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-219-5930: Head Height: 0.105 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM; Fastener Length: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN; Screw Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE AND IL-S-5000 FED STD 10TH MATERIAL RESPONSE AND IL-S-6049 MIL SPEC 10TH MATERIAL RESPONSE. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.