The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-219-2722, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 3 items share a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-219-2722 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.460 INCHES MINIMUM AND 0.553 INCHES MAXIMUM IN |
| Material Document and Classification | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| LO-012192722 | 5/9 Secondary reference Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings) |
| P00468NRP | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| LL-HX4-3622 | 5/9 Secondary reference Defense Logistics Agency Dba Defense Supply Center Philadelphia |
| 115387-24693-C51 | 3/2 Design control — primary reference U.S. Government activity |
| 115387 | D/9 Drawing number reference only U.S. Government activity |
NSN 5305-01-219-2722 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
3 possible matches (shared part number, not a government interchangeability claim): 5305-01-222-0823, 5962-01-297-1575, 5305-01-700-3944. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-01-219-2722: Fastener Length: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN; Surface Treatment Document and Classification: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.460 INCHES MINIMUM AND 0.553 INCHES MAXIMUM IN; Material Document and Classification: 66 FED STD ALL MATERIAL RESPONSES OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.