The Screw,externally Relieved Body, cataloged under National Stock Number 5305-01-217-7671, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-217-7671 |
| Item Name | Screw,externally Relieved Body |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Fastener Length | 7.397 INCHES MINIMUM AND 7.407 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-E-16400 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Pitch in Millimeters | 1.0 |
| Thread Length | 0.824 INCHES MINIMUM AND 0.834 INCHES MAXIMUM IN |
| Material Document and Classification | AISI NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| First Diameter From Head | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 6.0 MILLIMETERS MM |
| Head Style | KNURLED NO. 1 |
| Thread Direction | RIGHT-HAND |
| Distance From Largest Bearing Surface of Head to End of First Diameter | 6.568 INCHES MINIMUM AND 6.578 INCHES MAXIMUM IN |
| Externally Relieved Body Diameter Quantity | 1 |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | SLOT |
| Material | STEEL COMP 303 OVERALL |
| Thread Series Designator | ISO S |
| Head Diameter | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| SC0001 | 3/9 Design control — primary reference Control Systems Research Inc |
NSN 5305-01-217-7671 is a Screw,externally Relieved Body, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-217-7671: Head Height: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN; Fastener Length: 7.397 INCHES MINIMUM AND 7.407 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-E-16400 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Pitch in Millimeters: 1.0. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.