The Setscrew, cataloged under National Stock Number 5305-01-215-0091, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-215-0091 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN |
| Point Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Fastener Length | 2.400 INCHES MINIMUM AND 2.600 INCHES MAXIMUM IN |
| Point Chamfer Angle | 53.0 DEGREES NOMINAL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Point Style | FLAT |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 6147348 PC 03 | 3/9 Design control — primary reference U.S. Government activity |
NSN 5305-01-215-0091 is a Setscrew, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-215-0091: Head Height: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN; Point Length: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN; Fastener Length: 2.400 INCHES MINIMUM AND 2.600 INCHES MAXIMUM IN; Point Chamfer Angle: 53.0 DEGREES NOMINAL. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.