The Screw,close Tolerance, cataloged under National Stock Number 5305-01-214-7895, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-214-7895 |
| Primary Part Number | SC1827-3-3 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Howmet Global Fastening Systems Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 0.510 INCHES MINIMUM AND 0.557 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | AMS2506 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-83488,TYPE 2,CLASS 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 0.312 INCHES MINIMUM AND 0.379 INCHES MAXIMUM IN |
| Material Document and Classification | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | ALUMINUM OR ALUMINUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| SC1827-3-3 PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| HR205-3-3 PRIMARY | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| PBF1208-3-3 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| HR205-3-3 PRIMARY | Hi-Shear Corporation (USA) |
| Reference | Meaning |
|---|---|
| 122573-3-3 | 3/2 Design control — primary reference U.S. Government activity |
| GB510BY3-3 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
NSN 5305-01-214-7895 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-214-7895 has 4 manufacturer part numbers on file: SC1827-3-3 (Howmet Global Fastening Systems Inc), HR205-3-3 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), PBF1208-3-3 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), HR205-3-3 (Hi-Shear Corporation).
Key specifications for SC1827-3-3: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 0.510 INCHES MINIMUM AND 0.557 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.