PartsTable TECHNICAL DATA SHEET
NSN 5305-01-214-2691Government record, cited

Screw, Shoulder5305-01-214-2691

NSN 5305-01-214-2691 · NIIN 012142691 · Part number 12705-8C-16D
Sps Technologies, Llc Dba PB Fasteners · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 56878
Government record, cited
NSN 5305-01-214-2691 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-214-2691. Manufacturer of record part number: 12705-8C-16D.
Also searched as  5305-01-214-2691 · 5305012142691 · NIIN 012142691 · 01-214-2691 · FSC 5305 Screws · CAGE 56878 · 12705-8C-16D · 1175724-2
Nearby stock numbers  ·
Features
  • Screw,shoulder — FSC 5305
  • Width Across Flats: 0.250 INCHES NOMINAL IN
  • Head Height: 0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
  • Fastener Length: 1.600 INCHES MINIMUM AND 1.630 INCHES MAXIMUM IN
  • Shoulder Length: 0.093 INCHES NOMINAL FIRST SHOULDER IN
  • Surface Treatment Document and Classification: QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Shoulder Diameter: 0.496 INCHES MINIMUM AND 0.498 INCHES MAXIMUM FIRST SHOULDER IN
  • Thread Length: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Identification
  • NSN: 5305-01-214-2691
  • NIIN: 012142691
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 12705-8C-16D
  • Manufacturer: Sps Technologies, Llc Dba PB Fasteners
General Description

The Screw,shoulder, cataloged under National Stock Number 5305-01-214-2691, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies, Llc Dba PB Fasteners. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-214-2691
Primary Part Number12705-8C-16D
Item NameScrew,shoulder
FSC / FSG5305 / 53 — Screws
ManufacturerSps Technologies, Llc Dba PB Fasteners
StatusACTIVE
Width Across Flats0.250 INCHES NOMINAL IN
Head Height0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
Fastener Length1.600 INCHES MINIMUM AND 1.630 INCHES MAXIMUM IN
Shoulder Length0.093 INCHES NOMINAL FIRST SHOULDER IN
Surface Treatment Document and ClassificationQQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Shoulder Diameter0.496 INCHES MINIMUM AND 0.498 INCHES MAXIMUM FIRST SHOULDER IN
Thread Length0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Shoulder ShapeROUND FIRST SHOULDER
Hardness Rating36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
Single Shear StrengthERR-060
Nominal Thread Diameter0.375 INCHES IN
Thread DirectionRIGHT-HAND
Width Between Flats0.729 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Thread Class3A A
Thread Quantity Per Inch16
MaterialSTEEL OVERALL
Thread Series DesignatorUNRC
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
12705-8C-16D PRIMARY Sps Technologies, Llc Dba PB Fasteners (USA)
Reference documents
ReferenceMeaning
1175724-2 7/2 Vendor item drawing reference
Aerojet Rocketdyne Inc
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-214-2691?

NSN 5305-01-214-2691 is a Screw,shoulder, manufactured by Sps Technologies, Llc Dba PB Fasteners, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-214-2691?

NSN 5305-01-214-2691 has 1 manufacturer part number on file: 12705-8C-16D (Sps Technologies, Llc Dba PB Fasteners).

What are the specifications of 12705-8C-16D?

Key specifications for 12705-8C-16D: Width Across Flats: 0.250 INCHES NOMINAL IN; Head Height: 0.306 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN; Fastener Length: 1.600 INCHES MINIMUM AND 1.630 INCHES MAXIMUM IN; Shoulder Length: 0.093 INCHES NOMINAL FIRST SHOULDER IN. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-214-2691 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com