The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-213-5372, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-213-5372 |
| Item Name | Screw,cap,hexagon Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN |
| Fastener Length | 2.156 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | DOD-P-16232,TYPE Z,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.105 INCHES MINIMUM AND 0.113 INCHES MAXIMUM FIRST HOLE IN |
| Nominal Thread Diameter | 0.500 INCHES IN |
| Head Style | HEXAGON |
| Thread Direction | RIGHT-HAND |
| Width Between Flats | 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Nondefinitive Spec/std Data | 2 TYPE AND 10P STYLE AND 8 GRADE |
| Surface Treatment | PHOSPHATE ZINC OVERALL |
| Minimum Tensile Strength | 150000 POUNDS PER SQUARE INCH LBS |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 20 |
| Material | STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL |
| Thread Series Designator | UNF |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.974 INCHES MINIMUM AND 2.088 INCHES MAXIMUM FIRST HOLE IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-85 | 4/1 Identification reference U.S. Government activity |
| MS51108-117 | 2/2 Government specification standardization U.S. Government activity |
NSN 5305-01-213-5372 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-213-5372: Head Height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN; Fastener Length: 2.156 INCHES MINIMUM AND 2.250 INCHES MAXIMUM IN; Surface Treatment Document and Classification: DOD-P-16232,TYPE Z,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.