PartsTable TECHNICAL DATA SHEET
NSN 5305-01-204-4186Government record, cited

Screw, Machine5305-01-204-4186

NSN 5305-01-204-4186 · NIIN 012044186
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-204-4186 · 5305012044186 · NIIN 012044186 · 01-204-4186 · FSC 5305 Screws · 90273A542 · NASM51959-83 · FF-S-92 · AN505C416-16
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Screw Surface Treatment: PASSIVATE
  • Fastener Length: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
  • Thread Length: 0.869 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
  • Nominal Thread Diameter: 0.250 INCHES IN
  • Head Style: FLAT COUNTERSUNK
  • Thread Direction: RIGHT-HAND
  • Nondefinitive Spec/std Data: 3 TYPE AND 2C STYLE
Identification
  • NSN: 5305-01-204-4186
  • NIIN: 012044186
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,machine, cataloged under National Stock Number 5305-01-204-4186, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-204-4186
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Screw Surface TreatmentPASSIVATE
Fastener Length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
Thread Length0.869 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Nondefinitive Spec/std Data3 TYPE AND 2C STYLE
Screw MaterialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
Internal Drive StyleCROSS RECESS TYPE 1
Countersink Angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
Thread Class2A A
Thread Quantity Per Inch20
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Head Diameter0.462 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
Screw Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-01-561-030390273A542 POSSIBLE MATCH
SCREW,MACHINE
Possible match (shared part number)Mcmaster-Carr Supply Co
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
90273A542 C/1 Advisory reference — outside the item-of-supply concept
Mcmaster-Carr Supply Co
NASM51959-83 3/2 Design control — primary reference
U.S. Government activity
FF-S-92 4/1 Identification reference
U.S. Government activity
AN505C416-16 5/9 Secondary reference
U.S. Government activity
Related Parts
5305-01-561-0303POSSIBLE MATCH
SCREW,MACHINE
90273A542

Frequently Asked Questions

What is NSN 5305-01-204-4186?

NSN 5305-01-204-4186 is a Screw,machine, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-01-204-4186?

1 possible match (shared part number, not a government interchangeability claim): 5305-01-561-0303. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-01-204-4186?

Key specifications for 5305-01-204-4186: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN; Thread Length: 0.869 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.250 INCHES IN. 15 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-204-4186 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com