PartsTable TECHNICAL DATA SHEET
NSN 5305-01-204-1000Government record, cited

Screw, Close Tolerance5305-01-204-1000

NSN 5305-01-204-1000 · NIIN 012041000
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-204-1000 · 5305012041000 · NIIN 012041000 · 01-204-1000 · FSC 5305 Screws · NAS1581A5T12 · NAS1581F5T12
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES THREADS
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Fastener Length: 1.236 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.476 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN
  • Hardness Rating: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-204-1000
  • NIIN: 012041000
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-204-1000, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 22 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-204-1000
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Surface Finish32.0 MICROINCHES THREADS
Surface Finish32.0 MICROINCHES GRIP
Fastener Length1.236 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.476 INCHES MINIMUM AND 0.526 INCHES MAXIMUM IN
Hardness Rating36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.312 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Specification/standard Data80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
Grip Length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
Grip Diameter0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
Surface TreatmentCADMIUM AND CHROMATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleOFFSET CRUCIFORM (TORQUE SET)
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch24
MaterialSTEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.428 INCHES MINIMUM AND 0.478 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
⇄ Related Items 1
Each row states its source: a government interchangeability/replacement code, or a possible match on a shared part number.
5305-01-451-9106NAS15815T12 POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
Possible match (shared part number)National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
NAS1581A5T12 5/9 Secondary reference
U.S. Government activity
NAS1581F5T12 3/2 Design control — primary reference
U.S. Government activity
Related Parts
5305-01-451-9106POSSIBLE MATCH
SCREW,CLOSE TOLERANCE
NAS15815T12

Frequently Asked Questions

What is NSN 5305-01-204-1000?

NSN 5305-01-204-1000 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What NSN replaces 5305-01-204-1000?

1 possible match (shared part number, not a government interchangeability claim): 5305-01-451-9106. Verify interchangeability with system specifications before substitution.

What are the specifications of 5305-01-204-1000?

Key specifications for 5305-01-204-1000: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 1.236 INCHES MINIMUM AND 1.266 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY2,CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 22 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-204-1000 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com