The Screw,machine, cataloged under National Stock Number 5305-01-200-7733, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-200-7733 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | OXIDE |
| Fastener Length | 5.00 MILLIMETERS NOMINAL MM |
| Thread Pitch in Millimeters | 0.5 |
| Thread Length | 2.20 MILLIMETERS MINIMUM AND 3.20 MILLIMETERS MAXIMUM MM |
| Nominal Thread Diameter | 3.0 MILLIMETERS MM |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 |
| Color | BLACK |
| Minimum Tensile Strength | 80000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
| Thread Series Designator | M |
| Head Diameter | 5.50 MILLIMETERS MINIMUM AND 6.60 MILLIMETERS MAXIMUM MM |
| Screw Surface Treatment Document and Classification | MIL-C-13924 CL4 MIL SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| A3013116-1 | 3/2 Design control — primary reference U.S. Government activity |
| 511356-1 | 5/9 Secondary reference L3harris Technologies, Inc. Dba Harris Corporation |
NSN 5305-01-200-7733 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-200-7733: Screw Surface Treatment: OXIDE; Fastener Length: 5.00 MILLIMETERS NOMINAL MM; Thread Pitch in Millimeters: 0.5; Thread Length: 2.20 MILLIMETERS MINIMUM AND 3.20 MILLIMETERS MAXIMUM MM. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.