The Screw,close Tolerance, cataloged under National Stock Number 5305-01-199-3397, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-199-3397 |
| Primary Part Number | SC1786RV3-7D |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Howmet Global Fastening Systems Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN |
| Thread Length | 0.338 INCHES NOMINAL IN |
| Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 4967 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | OVAL COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.438 INCHES NOMINAL IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | TITANIUM ALLOY OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.635 INCHES MINIMUM AND 0.675 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| LE111-0041-6307 | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| SC1786RV3-7D PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| PBF1383-6307 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| T181-6307 | 5/9 Secondary reference U.S. Government activity |
| T181-6307 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| LE111-0041-6307 | 7/2 Vendor item drawing reference The Boeing Company Div Legacy Am&m |
| 123179V3R7D | 3/2 Design control — primary reference U.S. Government activity |
| LE111-0041-6307 | 5/2 Secondary reference U.S. Government activity |
NSN 5305-01-199-3397 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-199-3397 has 3 manufacturer part numbers on file: LE111-0041-6307 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), SC1786RV3-7D (Howmet Global Fastening Systems Inc), PBF1383-6307 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners).
Key specifications for SC1786RV3-7D: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM IN; Thread Length: 0.338 INCHES NOMINAL IN. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.