The Screw,close Tolerance, cataloged under National Stock Number 5305-01-198-8555, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Northrop Grumman Systems Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 5 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-198-8555 |
| Primary Part Number | GB510CE5-20 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Northrop Grumman Systems Corporation |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 1.714 INCHES MINIMUM AND 1.761 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837,TY 2 CL 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| Thread Length | 0.454 INCHES MINIMUM AND 0.521 INCHES MAXIMUM IN |
| Hardness Rating | 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| Material Document and Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OR CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 220000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL COMP H11 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.578 INCHES MINIMUM AND 0.634 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HR204-5-20 | Hi-Shear Corporation (USA) |
| GB510CE5-20 PRIMARY | Northrop Grumman Systems Corporation (USA) |
| PBF1202-5-20 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| HR204-5-20 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| SC1779-5-20 | Howmet Global Fastening Systems Inc (USA) |
| Reference | Meaning |
|---|---|
| 1067066T-5-20 | 5/2 Secondary reference U.S. Government activity |
NSN 5305-01-198-8555 is a Screw,close Tolerance, manufactured by Northrop Grumman Systems Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-198-8555 has 5 manufacturer part numbers on file: HR204-5-20 (Hi-Shear Corporation), GB510CE5-20 (Northrop Grumman Systems Corporation), PBF1202-5-20 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), HR204-5-20 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), SC1779-5-20 (Howmet Global Fastening Systems Inc).
Key specifications for GB510CE5-20: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 1.714 INCHES MINIMUM AND 1.761 INCHES MAXIMUM IN; Surface Treatment Document and Classification: NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837,TY 2 CL 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.