The Screw,close Tolerance, cataloged under National Stock Number 5305-01-197-4010, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 25 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-197-4010 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Fastener Length | 1.856 INCHES MINIMUM AND 1.876 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN |
| Hardness Rating | 43.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM FASTENER |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.438 INCHES MINIMUM AND 1.454 INCHES MAXIMUM IN |
| Grip Diameter | 0.4287 INCHES MINIMUM AND 0.4292 INCHES MAXIMUM IN |
| Locking Feature | DETENT BALL GRIP |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 63000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 631 OR STEEL COMP 302 SPRING |
| Material | STEEL COMP 632 FASTENER |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.761 INCHES MINIMUM AND 1.781 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS21130B423 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-197-4010 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-197-4010: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Fastener Length: 1.856 INCHES MINIMUM AND 1.876 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 25 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.