PartsTable TECHNICAL DATA SHEET
NSN 5305-01-197-2496Government record, cited

Screw Assembly, Panel5305-01-197-2496

NSN 5305-01-197-2496 · NIIN 011972496 · Part number 374647-15
L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 00752
Government record, cited
NSN 5305-01-197-2496 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-197-2496. Manufacturer of record part number: 374647-15.
Also searched as  5305-01-197-2496 · 5305011972496 · NIIN 011972496 · 01-197-2496 · FSC 5305 Screws · CAGE 00752 · 374647-15 · FRB7500-6-B-4 · FRB7500-6-B-4 · FRB7500-6-B-4
Nearby stock numbers  ·
Features
  • Screw Assembly,panel — FSC 5305
  • Head Height: 0.370 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
  • Fastener Length: 0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
  • Surface Treatment Document and Classification: MIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
Identification
  • NSN: 5305-01-197-2496
  • NIIN: 011972496
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: 374647-15
  • Manufacturer: L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products
General Description

The Screw Assembly,panel, cataloged under National Stock Number 5305-01-197-2496, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products. Government technical data includes 30 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-197-2496
Primary Part Number374647-15
Item NameScrew Assembly,panel
FSC / FSG5305 / 53 — Screws
ManufacturerL3harris Technologies, Inc. Dba Harris Corp Div Antenna Products
StatusACTIVE
Head Height0.370 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
Fastener Length0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
Surface Treatment Document and ClassificationMIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF
Surface Treatment Document and ClassificationMIL-A-8625,TYPE 1,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE HEAD
Material Accommodated Thickness0.032 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
Material Document and ClassificationASTM A580 ASSN STD SINGLE MATERIAL RESPONSE SPRING
Material Document and ClassificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
Material Document and ClassificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER
Material Document and ClassificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE HEAD
Material Document and ClassificationQQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF
Material Document and ClassificationASTM A493 ASSN STD ALL MATERIAL RESPONSES FASTENER
Nominal Thread Diameter0.138 INCHES IN
Head StyleKNURLED NO. 1
Thread DirectionRIGHT-HAND
Surface TreatmentANODIZE STAND-OFF
Surface TreatmentPASSIVATE PRIMARY WASHER
Surface TreatmentPASSIVATE FASTENER
Surface TreatmentPASSIVATE SECONDARY WASHER
Surface TreatmentPASSIVATE SPRING
Surface TreatmentANODIZE HEAD
Internal Drive StyleSLOT
Thread Quantity Per Inch32
MaterialSTEEL COMP 301 SECONDARY WASHER
MaterialSTEEL COMP 302 SPRING
MaterialSTEEL COMP 301 PRIMARY WASHER
MaterialSTEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 FASTENER
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
374647-15 PRIMARY L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products (USA)
FRB7500-6-B-4 Huck International, Inc (USA)
Reference documents
ReferenceMeaning
FRB7500-6-B-4 5/9 Secondary reference
U.S. Government activity
FRB7500-6-B-4 5/9 Secondary reference
Huck International, Inc. Div Huck Products Division
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-197-2496?

NSN 5305-01-197-2496 is a Screw Assembly,panel, manufactured by L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-197-2496?

NSN 5305-01-197-2496 has 2 manufacturer part numbers on file: 374647-15 (L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products), FRB7500-6-B-4 (Huck International, Inc).

What are the specifications of 374647-15?

Key specifications for 374647-15: Head Height: 0.370 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN; Fastener Length: 0.590 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SECONDARY WASHER. 30 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-197-2496 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com