PartsTable TECHNICAL DATA SHEET
NSN 5305-01-195-5807Government record, cited

Screw, Assembled Washer5305-01-195-5807

NSN 5305-01-195-5807 · NIIN 011955807
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-195-5807 · 5305011955807 · NIIN 011955807 · 01-195-5807 · FSC 5305 Screws · 11509371 · 11504691 · 11509371 · 11500994 · 11504691
Nearby stock numbers  ·
Features
  • Screw,assembled Washer — FSC 5305
  • Nonmachine Nominal Thread Diameter: 6.3 MILLIMETERS MM
  • Head Height: 4.37 MILLIMETERS MINIMUM AND 4.83 MILLIMETERS MAXIMUM MM
  • Fastener Length: 15.92 MILLIMETERS MINIMUM AND 16.08 MILLIMETERS MAXIMUM MM
  • Surface Treatment Document and Classification: GM 9093-P FSCM 24617 MFR REF SINGLE TREATMENT RESPONSE FASTENER
  • Thread Pitch in Millimeters: 1.81
  • Primary Washer Outside Diameter: 16.57 MILLIMETERS MINIMUM AND 17.00 MILLIMETERS MAXIMUM MM
  • Thread Length: 12.36 MILLIMETERS MINIMUM AND 13.07 MILLIMETERS MAXIMUM MM
Identification
  • NSN: 5305-01-195-5807
  • NIIN: 011955807
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,assembled Washer, cataloged under National Stock Number 5305-01-195-5807, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-195-5807
Item NameScrew,assembled Washer
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Nonmachine Nominal Thread Diameter6.3 MILLIMETERS MM
Head Height4.37 MILLIMETERS MINIMUM AND 4.83 MILLIMETERS MAXIMUM MM
Fastener Length15.92 MILLIMETERS MINIMUM AND 16.08 MILLIMETERS MAXIMUM MM
Surface Treatment Document and ClassificationGM 9093-P FSCM 24617 MFR REF SINGLE TREATMENT RESPONSE FASTENER
Thread Pitch in Millimeters1.81
Primary Washer Outside Diameter16.57 MILLIMETERS MINIMUM AND 17.00 MILLIMETERS MAXIMUM MM
Thread Length12.36 MILLIMETERS MINIMUM AND 13.07 MILLIMETERS MAXIMUM MM
Nonmachine Thread StyleGIMLET POINT (TYPE A, AB OR BA)
Material Document and ClassificationGM 6010-M FSCM 24617 MFR REF SINGLE MATERIAL RESPONSE OVERALL
Head StyleHEXAGON
Primary Washer StyleFLAT
Thread DirectionRIGHT-HAND
Primary Washer Material Thickness1.20 MILLIMETERS MINIMUM AND 1.75 MILLIMETERS MAXIMUM MM
Width Between Flats9.78 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM MM
Surface TreatmentPHOSPHATE FASTENER
Internal Drive StyleW/O INTERNAL DRIVE
MaterialSTEEL PRIMARY WASHER
MaterialSTEEL FASTENER
Washer Quantity1
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
11509371 5/9 Secondary reference
General Motors Llc Dba General Motors Llc
11504691 C/1 Advisory reference — outside the item-of-supply concept
General Motors Llc Dba General Motors Llc
11509371 5/9 Secondary reference
General Motors Corp Chevrolet Motor Div Special Products Dept
11500994 5/9 Secondary reference
General Motors Corp
11504691 3/9 Design control — primary reference
General Motors Corp
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-195-5807?

NSN 5305-01-195-5807 is a Screw,assembled Washer, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-195-5807?

Key specifications for 5305-01-195-5807: Nonmachine Nominal Thread Diameter: 6.3 MILLIMETERS MM; Head Height: 4.37 MILLIMETERS MINIMUM AND 4.83 MILLIMETERS MAXIMUM MM; Fastener Length: 15.92 MILLIMETERS MINIMUM AND 16.08 MILLIMETERS MAXIMUM MM; Surface Treatment Document and Classification: GM 9093-P FSCM 24617 MFR REF SINGLE TREATMENT RESPONSE FASTENER. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-195-5807 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com