The Screw,close Tolerance, cataloged under National Stock Number 5305-01-190-7555, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Government technical data includes 24 specifications, cited from the U.S. Government catalog. The record lists 4 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-190-7555 |
| Primary Part Number | GB10CG4-23 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Howmet Global Fastening Systems Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 1.856 INCHES MINIMUM AND 1.876 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.402 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN |
| Hardness Rating | 47.0 ROCKWELL C MAXIMUM AND 43.0 ROCKWELL C MINIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE HEAD |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.438 INCHES MINIMUM AND 1.454 INCHES MAXIMUM IN |
| Grip Diameter | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Locking Feature | DETENT BALL THREADS |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 63000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 101.0 DEGREES MAXIMUM AND 99.0 DEGREES MINIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.771 INCHES MINIMUM AND 1.787 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| GB10CG4-23 | Howmet Global Fastening Systems Inc (USA) |
| GB10CG4-23 | Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN) |
| GB10CG4-23 | Hi-Shear Corporation (USA) |
| GB10CG4-23 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| GB10CG4-23 | 5/2 Secondary reference U.S. Government activity |
| GB10CG4-23 | 5/9 Secondary reference Abounding Security Inc Div of Maa Corp |
| GB510CG4-23 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
| AS292-4-23 | 3/9 Design control — primary reference U.S. Government activity |
| GB10CG4-23 | 5/2 Secondary reference U.S. Government activity |
NSN 5305-01-190-7555 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-190-7555 has 4 manufacturer part numbers on file: GB10CG4-23 (Howmet Global Fastening Systems Inc), GB10CG4-23 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc), GB10CG4-23 (Hi-Shear Corporation), GB10CG4-23 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners).
Key specifications for GB10CG4-23: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 1.856 INCHES MINIMUM AND 1.876 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.