The Screw,machine, cataloged under National Stock Number 5305-01-188-4759, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-188-4759 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | PASSIVATE |
| Fastener Length | 0.125 INCHES NOMINAL IN |
| Screw Material Document and Classification | QQ-S-762,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 0.025 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Surface Treatment | ENAMEL |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Head Surface Treatment Document and Classification | 595 FED STD 2ND TREATMENT RESPONSE |
| Screw Material | STEEL CORROSION RESISTING |
| Minimum Tensile Strength | 1120 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 507169-39 | 5/9 Secondary reference U.S. Government activity |
| 533400-39 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-188-4759 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-188-4759: Screw Surface Treatment: PASSIVATE; Fastener Length: 0.125 INCHES NOMINAL IN; Screw Material Document and Classification: QQ-S-762,300 SERIES FED SPEC SINGLE MATERIAL RESPONSE; Thread Length: 0.025 INCHES NOMINAL IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.