The Screw,close Tolerance, cataloged under National Stock Number 5305-01-184-7699, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sps Technologies Llc Dba PB Fasteners Div PB Fasteners. Government technical data includes 22 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-184-7699 |
| Primary Part Number | GB510CG421 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 1.730 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN |
| Hardness Rating | 43.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM OVERALL |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 1.312 INCHES MINIMUM AND 1.328 INCHES MAXIMUM IN |
| Grip Diameter | 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN |
| Locking Feature | DETENT BALL GRIP |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP XM-13 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.635 INCHES MINIMUM AND 1.655 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.449 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| GB510CG421 | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| GB510CG421 | Howmet Global Fastening Systems Inc (USA) |
| Reference | Meaning |
|---|---|
| GB510CG421 | 7/2 Vendor item drawing reference Northrop Grumman Systems Corporation |
| AS292-4-21 | 3/2 Design control — primary reference U.S. Government activity |
| GB510CG421 | 5/9 Secondary reference Abounding Security Inc Div of Maa Corp |
| GB510CG421 | 5/2 Secondary reference U.S. Government activity |
NSN 5305-01-184-7699 is a Screw,close Tolerance, manufactured by Sps Technologies Llc Dba PB Fasteners Div PB Fasteners, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-184-7699 has 2 manufacturer part numbers on file: GB510CG421 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), GB510CG421 (Howmet Global Fastening Systems Inc).
Key specifications for GB510CG421: Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 1.730 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM IN. 22 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.