The Screw,close Tolerance, cataloged under National Stock Number 5305-01-183-5863, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Huck International, Inc. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 7 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-183-5863 |
| Primary Part Number | BACB30LU3D10 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Huck International, Inc |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES GRIP |
| Fastener Length | 0.955 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TYPE 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.320 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 0.782 INCHES MINIMUM AND 0.832 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.337 INCHES MINIMUM AND 0.383 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| BACB30LU3D10 PRIMARY | Huck International, Inc (USA) |
| BACB30LU3D10 PRIMARY | Valley-Todeco, Inc. Dba Arconic Fastening Systems (USA) |
| BACB30LU3D10 PRIMARY | Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company (USA) |
| BACB30LU3D10 PRIMARY | Sps Technologies Llc Dba PB Fasteners Div PB Fasteners (USA) |
| BACB30LU3D10 PRIMARY | Howmet Global Fastening Systems Inc (USA) |
| BACB30LU3D10 PRIMARY | Federal Manufacturing Corp (USA) |
| BACB30LU3D10 | Sonic Industries, Inc. Dba Sonic Industries Inc Div Sonic Industries (USA) |
| Reference | Meaning |
|---|---|
| BACB30LU3D10 | 5/9 Secondary reference U.S. Government activity |
| BACB30LU3D10 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| BACB30LU3D10 | 3/2 Design control — primary reference U.S. Government activity |
| BACB30LU3D10 | 3/2 Design control — primary reference U.S. Government activity |
| BACB30LU3D10 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-183-5863 is a Screw,close Tolerance, manufactured by Huck International, Inc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-183-5863 has 7 manufacturer part numbers on file: BACB30LU3D10 (Huck International, Inc), BACB30LU3D10 (Valley-Todeco, Inc. Dba Arconic Fastening Systems), BACB30LU3D10 (Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company), BACB30LU3D10 (Sps Technologies Llc Dba PB Fasteners Div PB Fasteners), BACB30LU3D10 (Howmet Global Fastening Systems Inc) and 2 more.
Key specifications for BACB30LU3D10: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES GRIP; Fastener Length: 0.955 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TYPE 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.