The Setscrew, cataloged under National Stock Number 5305-01-183-5542, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Woodward, Inc.. Government technical data includes 20 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-183-5542 |
| Primary Part Number | 3369-035 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Woodward, Inc. |
| Status | ACTIVE |
| Point Diameter | 0.094 INCHES NOMINAL IN |
| Head Height | 0.276 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN |
| Point Length | 0.250 INCHES NOMINAL IN |
| Fastener Length | 1.000 INCHES NOMINAL IN |
| Hole Configuration Style | ROUND |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Point Style | DOG |
| Surface Treatment | CADMIUM AND CHROMATE OVERALL |
| Minimum Tensile Strength | 60000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 18 |
| Material | STEEL OVERALL |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Hole Type | DRILLED |
| Hole Diameter | 0.070 INCHES NOMINAL IN |
| Head Diameter | 0.490 INCHES MINIMUM AND 0.518 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 3369-035 PRIMARY | Woodward, Inc. (USA) |
NSN 5305-01-183-5542 is a Setscrew, manufactured by Woodward, Inc., classified under FSC 5305, Screws. Status: active.
NSN 5305-01-183-5542 has 1 manufacturer part number on file: 3369-035 (Woodward, Inc.).
Key specifications for 3369-035: Point Diameter: 0.094 INCHES NOMINAL IN; Head Height: 0.276 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN; Point Length: 0.250 INCHES NOMINAL IN; Fastener Length: 1.000 INCHES NOMINAL IN. 20 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.