The Screw,close Tolerance, cataloged under National Stock Number 5305-01-183-4017, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Howmet Global Fastening Systems Inc. Div Tridair Products. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-183-4017 |
| Primary Part Number | CA2193-4-04 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Howmet Global Fastening Systems Inc. Div Tridair Products |
| Status | ACTIVE |
| Surface Finish | 32.0 MICROINCHES THREADS |
| Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| Width Across Flats | 0.1565 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM IN |
| Fastener Length | 0.776 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.516 INCHES MINIMUM AND 0.556 INCHES MAXIMUM IN |
| Material Document and Classification | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN |
| Grip Diameter | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.454 INCHES MINIMUM AND 0.508 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| FIT01-0002-4004 | Fastener Innovation Technology, Inc. Dba F I T (USA) |
| CA2193-4-04 PRIMARY | Howmet Global Fastening Systems Inc. Div Tridair Products (USA) |
| Reference | Meaning |
|---|---|
| LE111-0002-4004 | 7/2 Vendor item drawing reference The Boeing Company Div Legacy Am&m |
NSN 5305-01-183-4017 is a Screw,close Tolerance, manufactured by Howmet Global Fastening Systems Inc. Div Tridair Products, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-183-4017 has 2 manufacturer part numbers on file: FIT01-0002-4004 (Fastener Innovation Technology, Inc. Dba F I T), CA2193-4-04 (Howmet Global Fastening Systems Inc. Div Tridair Products).
Key specifications for CA2193-4-04: Surface Finish: 32.0 MICROINCHES THREADS; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Width Across Flats: 0.1565 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM IN; Fastener Length: 0.776 INCHES MINIMUM AND 0.796 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.