The Screw,machine, cataloged under National Stock Number 5305-01-174-8210, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-174-8210 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Head Height | 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN |
| Screw Surface Treatment | ANODIZE |
| Fastener Length | 1.690 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN |
| Screw Material Document and Classification | QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE |
| Thread Length | 1.628 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FILLISTER |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 1 TYPE OR 5S STYLE |
| Screw Material | ALUMINUM ALLOY 2024 |
| Minimum Tensile Strength | 62000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | SLOT |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Hole Quantity | 1 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Hole Configuration Style | ROUND |
| Hole Diameter | 0.046 INCHES NOMINAL IN |
| Head Diameter | 0.208 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| MS35277-37 | 2/2 Government specification standardization U.S. Government activity |
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
NSN 5305-01-174-8210 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-174-8210: Head Height: 0.089 INCHES MINIMUM AND 0.096 INCHES MAXIMUM IN; Screw Surface Treatment: ANODIZE; Fastener Length: 1.690 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN; Screw Material Document and Classification: QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.