PartsTable TECHNICAL DATA SHEET
NSN 5305-01-168-1204Government record, cited

Screw, Close Tolerance5305-01-168-1204

NSN 5305-01-168-1204 · NIIN 011681204
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-168-1204 · 5305011681204 · NIIN 011681204 · 01-168-1204 · FSC 5305 Screws · MS21125-435 · MS21125-435
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD
  • Head Height: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
  • Fastener Length: 2.606 INCHES MINIMUM AND 2.626 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.277 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
  • Nominal Thread Diameter: 0.250 INCHES IN
Identification
  • NSN: 5305-01-168-1204
  • NIIN: 011681204
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-168-1204, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-168-1204
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Surface Finish32.0 MICROINCHES GRIP
Surface Finish32.0 MICROINCHES BEARING SURFACE OF HEAD
Head Height0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
Fastener Length2.606 INCHES MINIMUM AND 2.626 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.277 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
Nominal Thread Diameter0.250 INCHES IN
Head StylePAN NO. 2
Thread DirectionRIGHT-HAND
Grip Length2.188 INCHES MINIMUM AND 2.204 INCHES MAXIMUM IN
Grip Diameter0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
Locking FeatureDETENT BALL GRIP
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength90000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleSLOT
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP 630 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.477 INCHES MINIMUM AND 0.492 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
MS21125-435 3/2 Design control — primary reference
U.S. Government activity
MS21125-435 5/9 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-168-1204?

NSN 5305-01-168-1204 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-168-1204?

Key specifications for 5305-01-168-1204: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN; Fastener Length: 2.606 INCHES MINIMUM AND 2.626 INCHES MAXIMUM IN. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-168-1204 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com