PartsTable TECHNICAL DATA SHEET
NSN 5305-01-165-2460Government record, cited

Screw, Close Tolerance5305-01-165-2460

NSN 5305-01-165-2460 · NIIN 011652460 · Part number LB35-4-10
Hi-Shear Corporation · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 73197
Government record, cited
NSN 5305-01-165-2460 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-165-2460. Manufacturer of record part number: LB35-4-10.
Also searched as  5305-01-165-2460 · 5305011652460 · NIIN 011652460 · 01-165-2460 · FSC 5305 Screws · CAGE 73197 · LB35-4-10 · ST3M791C4-10 · AS301-4-10 · ST3M791C4-10
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 63.0 MICROINCHES GRIP
  • Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD
  • Width Across Flats: 0.250 INCHES NOMINAL IN
  • Fastener Length: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
  • Thread Length: 0.344 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
  • Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
  • Material Document and Classification: AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-165-2460
  • NIIN: 011652460
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: LB35-4-10
  • Manufacturer: Hi-Shear Corporation
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-165-2460, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 4 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-165-2460
Primary Part NumberLB35-4-10
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerHi-Shear Corporation
StatusACTIVE
Surface Finish63.0 MICROINCHES GRIP
Surface Finish63.0 MICROINCHES BEARING SURFACE OF HEAD
Width Across Flats0.250 INCHES NOMINAL IN
Fastener Length1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
Thread Length0.344 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
Shank Unthreaded Hole Diameter0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.625 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
Grip Diameter0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Internal Drive StyleHEXAGON
Countersink Angle100.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP XM-13 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.016 INCHES NOMINAL FIRST HOLE IN
Head Diameter0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
LB35-4-10 PRIMARY Hi-Shear Corporation (USA)
LB35-4-10 PRIMARY Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc (CAN)
Reference documents
ReferenceMeaning
ST3M791C4-10 7/2 Vendor item drawing reference
The Boeing Company Div Defense
AS301-4-10 5/2 Secondary reference
U.S. Government activity
ST3M791C4-10 5/2 Secondary reference
U.S. Government activity
10115500 6/9 Informative reference only
Nimikkeistokeskus Ncb Finland
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-165-2460?

NSN 5305-01-165-2460 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-165-2460?

NSN 5305-01-165-2460 has 2 manufacturer part numbers on file: LB35-4-10 (Hi-Shear Corporation), LB35-4-10 (Lisi Aerospace Canada Corp Div Hi Shear Holdings Inc).

What are the specifications of LB35-4-10?

Key specifications for LB35-4-10: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Width Across Flats: 0.250 INCHES NOMINAL IN; Fastener Length: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-165-2460 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com