The Screw,machine, cataloged under National Stock Number 5305-01-162-0636, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 13 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-162-0636 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | ZINC |
| Fastener Length | 0.375 INCHES NOMINAL IN |
| Thread Length | 0.375 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 82.0 DEGREES NOMINAL |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.322 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 114116FLUKE | 3/9 Design control — primary reference Perine Machine Tool Corp |
| 114116 | 1/2 Source control — Government-approved source U.S. Government activity |
| 8-32X3/8CRESFLH | 5/9 Secondary reference Perine Machine Tool Corp |
NSN 5305-01-162-0636 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 6635-01-445-7463. Verify interchangeability with system specifications before substitution.
Key specifications for 5305-01-162-0636: Screw Surface Treatment: ZINC; Fastener Length: 0.375 INCHES NOMINAL IN; Thread Length: 0.375 INCHES NOMINAL IN; Nominal Thread Diameter: 0.164 INCHES IN. 13 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.