The Screw,close Tolerance, cataloged under National Stock Number 5305-01-161-2020, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 17 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-161-2020 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Fastener Length | 0.472 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.363 INCHES NOMINAL IN |
| Nominal Thread Diameter | 0.190 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN |
| Grip Diameter | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN |
| Surface Treatment | CADMIUM OVERALL |
| Minimum Tensile Strength | 3180 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | OFFSET CRUCIFORM (TORQUE SET) |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | IRON ALLOY 660 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Head Diameter | 0.339 INCHES MINIMUM AND 0.381 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 5305PL0783931 | 6/9 Informative reference only Jednolity Indeks Materialowy - Uniform Material Index |
| NAS1580C3T2P | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-161-2020 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-161-2020: Fastener Length: 0.472 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN; Surface Treatment Document and Classification: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.363 INCHES NOMINAL IN; Nominal Thread Diameter: 0.190 INCHES IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.