PartsTable TECHNICAL DATA SHEET
NSN 5305-01-161-0354Government record, cited

Screw, Cap, Hexagon Head5305-01-161-0354

NSN 5305-01-161-0354 · NIIN 011610354
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-161-0354 · 5305011610354 · NIIN 011610354 · 01-161-0354 · FSC 5305 Screws
Nearby stock numbers  ·
Features
  • Screw,cap,hexagon Head — FSC 5305
  • Head Height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
  • Fastener Length: 3.440 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
  • Special Test Features: SPECIAL QUALITY CONTROL TESTING
  • Thread Length: 1.000 INCHES NOMINAL IN
  • Criticality Code Justification: ZZZY
  • Nominal Thread Diameter: 0.375 INCHES IN
  • Head Style: HEXAGON
Identification
  • NSN: 5305-01-161-0354
  • NIIN: 011610354
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,hexagon Head, cataloged under National Stock Number 5305-01-161-0354, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-161-0354
Item NameScrew,cap,hexagon Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Head Height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
Fastener Length3.440 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN
Special Test FeaturesSPECIAL QUALITY CONTROL TESTING
Thread Length1.000 INCHES NOMINAL IN
Criticality Code JustificationZZZY
Nominal Thread Diameter0.375 INCHES IN
Head StyleHEXAGON
Thread DirectionRIGHT-HAND
Width Between Flats0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
Thread Class2A A
Test Data Document81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
Thread Quantity Per Inch16
MaterialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Thread Series DesignatorUNIFIED NATIONAL COARSE (UNC)
Reference Number Differentiating CharacteristicsAS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MERCURY CONTAMINATION
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeC
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
07-D-3114 PIECE 13 3/9 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-161-0354?

NSN 5305-01-161-0354 is a Screw,cap,hexagon Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-161-0354?

Key specifications for 5305-01-161-0354: Head Height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN; Fastener Length: 3.440 INCHES MINIMUM AND 3.500 INCHES MAXIMUM IN; Special Test Features: SPECIAL QUALITY CONTROL TESTING; Thread Length: 1.000 INCHES NOMINAL IN. 15 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-161-0354 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com