The Screw,machine, cataloged under National Stock Number 5305-01-153-9277, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-153-9277 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN |
| Thread Length | 0.585 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.164 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Nondefinitive Spec/std Data | 3 TYPE AND 3C STYLE |
| Minimum Tensile Strength | 55000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 32 |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| FF-S-92 | 4/1 Identification reference U.S. Government activity |
| MS24693-CB52 | C/1 Advisory reference — outside the item-of-supply concept Zf Industrieantriebe Witten Gmbh |
| 4695027 | D/9 Drawing number reference only U.S. Government activity |
| MS24693-CB52 | 5/9 Secondary reference U.S. Government activity |
| MS24693-CB52 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-153-9277 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-153-9277: Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN; Thread Length: 0.585 INCHES MINIMUM AND 0.678 INCHES MAXIMUM IN; Nominal Thread Diameter: 0.164 INCHES IN. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.