The Setscrew, cataloged under National Stock Number 5305-01-151-8288, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is General Motors Llc Dba General Motors Llc. Government technical data includes 15 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-151-8288 |
| Primary Part Number | 15705372 |
| Item Name | Setscrew |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | General Motors Llc Dba General Motors Llc |
| Status | ACTIVE |
| Head Height | 0.178 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN |
| Fastener Length | 2.000 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | G-6184 FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| Point Chamfer Angle | 30.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Point Style | CONE |
| Surface Treatment | CADMIUM OVERALL |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 2A A |
| Thread Quantity Per Inch | 28 |
| Material | STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1011 OR STEEL COMP 1013 OVERALL |
| Thread Series Designator | UNF |
| Head Diameter | 0.295 INCHES MINIMUM AND 0.305 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 15705372 PRIMARY | General Motors Llc Dba General Motors Llc (USA) |
| Reference | Meaning |
|---|---|
| 9438150 | 5/9 Secondary reference General Motors Corp Chevrolet Motor Div Special Products Dept |
| 9438150 | 5/9 Secondary reference General Motors Llc Dba General Motors Llc |
NSN 5305-01-151-8288 is a Setscrew, manufactured by General Motors Llc Dba General Motors Llc, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-151-8288 has 1 manufacturer part number on file: 15705372 (General Motors Llc Dba General Motors Llc).
1 possible match (shared part number, not a government interchangeability claim): 3030-01-478-9669. Verify interchangeability with system specifications before substitution.
Key specifications for 15705372: Head Height: 0.178 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN; Fastener Length: 2.000 INCHES NOMINAL IN; Surface Treatment Document and Classification: G-6184 FSCM 11862 MFR REF SINGLE TREATMENT RESPONSE OVERALL; Point Chamfer Angle: 30.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM. 15 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.