The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-150-8724, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-150-8724 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.109 INCHES NOMINAL IN |
| Head Height | 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN |
| Fastener Length | 1.250 INCHES NOMINAL IN |
| Surface Treatment Document and Classification | QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.750 INCHES MINIMUM IN |
| Material Document and Classification | AMS 5640 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | PASSIVATE OVERALL |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 303SE OR STEEL COMP 303 PLUS X OR STEEL COMP 303 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 10115458 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| 262680 | 5/9 Secondary reference Kidde-Fenwal, Llc |
| 262680 | 3/2 Design control — primary reference U.S. Government activity |
NSN 5305-01-150-8724 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-150-8724: Width Across Flats: 0.109 INCHES NOMINAL IN; Head Height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN; Fastener Length: 1.250 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.