PartsTable TECHNICAL DATA SHEET
NSN 5305-01-145-8394Government record, cited

Screw, Close Tolerance5305-01-145-8394

NSN 5305-01-145-8394 · NIIN 011458394
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-145-8394 · 5305011458394 · NIIN 011458394 · 01-145-8394 · FSC 5305 Screws · AS205-12-27 · GB511DW12-27
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 32.0 MICROINCHES GRIP
  • Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD
  • Head Height: 0.376 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
  • Fastener Length: 2.701 INCHES MINIMUM AND 2.717 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
  • Surface Treatment Document and Classification: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
  • Thread Length: 0.997 INCHES MINIMUM AND 1.029 INCHES MAXIMUM IN
Identification
  • NSN: 5305-01-145-8394
  • NIIN: 011458394
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-145-8394, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 27 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-145-8394
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Surface Finish32.0 MICROINCHES GRIP
Surface Finish32.0 MICROINCHES BEARING SURFACE OF HEAD
Head Height0.376 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
Fastener Length2.701 INCHES MINIMUM AND 2.717 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
Surface Treatment Document and ClassificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
Thread Length0.997 INCHES MINIMUM AND 1.029 INCHES MAXIMUM IN
Hardness Rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
Shank Unthreaded Hole Diameter0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationAMS5678 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A580 COND. A ASSN STD 2ND MATERIAL RESPONSE SPRING
Nominal Thread Diameter0.750 INCHES IN
Head StyleCROWNED HEXAGON
Thread DirectionRIGHT-HAND
Grip Length1.688 INCHES MINIMUM AND 1.704 INCHES MAXIMUM IN
Width Between Flats1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM IN
Grip Diameter0.7486 INCHES MINIMUM AND 0.7491 INCHES MAXIMUM IN
Locking FeatureDETENT BALL GRIP
Surface TreatmentPASSIVATE FASTENER
Surface TreatmentPASSIVATE SPRING
Minimum Tensile Strength170000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleSLOT
Thread Class3A A
Thread Quantity Per Inch16
MaterialSTEEL COMP 631 OR STEEL COMP 302 SPRING
MaterialSTEEL COMP 630 FASTENER
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center2.503 INCHES MINIMUM AND 2.519 INCHES MAXIMUM FIRST HOLE IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
AS205-12-27 3/2 Design control — primary reference
U.S. Government activity
GB511DW12-27 7/2 Vendor item drawing reference
Northrop Grumman Systems Corporation
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-145-8394?

NSN 5305-01-145-8394 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-145-8394?

Key specifications for 5305-01-145-8394: Surface Finish: 32.0 MICROINCHES GRIP; Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Head Height: 0.376 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN; Fastener Length: 2.701 INCHES MINIMUM AND 2.717 INCHES MAXIMUM IN. 27 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-145-8394 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com