PartsTable TECHNICAL DATA SHEET
NSN 5305-01-145-8393Government record, cited

Screw, Close Tolerance5305-01-145-8393

NSN 5305-01-145-8393 · NIIN 011458393
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-145-8393 · 5305011458393 · NIIN 011458393 · 01-145-8393 · FSC 5305 Screws · SFH26-4-A8 · SFH26-4-A8
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Fastener Length: 0.777 INCHES MINIMUM AND 0.824 INCHES MAXIMUM IN
  • Surface Treatment Document and Classification: MIL-C-8837 TY 1 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.267 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
  • Hardness Rating: 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
  • Material Document and Classification: AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
  • Nominal Thread Diameter: 0.250 INCHES IN
  • Head Style: FLAT COUNTERSUNK
Identification
  • NSN: 5305-01-145-8393
  • NIIN: 011458393
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-145-8393, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 19 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-145-8393
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Fastener Length0.777 INCHES MINIMUM AND 0.824 INCHES MAXIMUM IN
Surface Treatment Document and ClassificationMIL-C-8837 TY 1 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.267 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN
Hardness Rating51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL
Material Document and ClassificationAMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
Grip Diameter0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
Surface TreatmentCADMIUM OVERALL
Minimum Tensile Strength260000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHIGH-TORQUE
Countersink Angle99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP H11 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Diameter0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
SFH26-4-A8 5/9 Secondary reference
Sps Technologies, Llc Dba PB Fasteners
SFH26-4-A8 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016
5305-00-001-5016 · Item name not on file
5305-00-001-9160
5305-00-001-9160 · Item name not on file
5305-00-001-9629
SCREW,ADJUSTING CLEVIS
5305-00-001-9742
5305-00-001-9742 · Item name not on file
5305-00-001-9768
SCREW,CAP,SOCKET HEAD
5305-00-003-4306
SCREW,MACHINE
5305-00-003-6694
5305-00-003-6694 · Item name not on file
5305-00-003-6753
5305-00-003-6753 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-145-8393?

NSN 5305-01-145-8393 is a Screw,close Tolerance, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-145-8393?

Key specifications for 5305-01-145-8393: Fastener Length: 0.777 INCHES MINIMUM AND 0.824 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-8837 TY 1 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.267 INCHES MINIMUM AND 0.334 INCHES MAXIMUM IN; Hardness Rating: 51.0 ROCKWELL C MINIMUM AND 54.0 ROCKWELL C MAXIMUM OVERALL. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-145-8393 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com