The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-134-0724, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 14 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-134-0724 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.500 INCHES NOMINAL IN |
| Head Height | 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN |
| Fastener Length | 1.690 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN |
| Thread Length | 1.000 INCHES MINIMUM IN |
| Hardness Rating | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL |
| Nominal Thread Diameter | 0.625 INCHES IN |
| Head Style | FLAT CHAMFER |
| Thread Direction | RIGHT-HAND |
| Internal Drive Style | HEXAGON |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 11 |
| Material | STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 303 PLUS X OR STEEL COMP 302B OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 410 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.921 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 125-2005563 PIECE 14 | 3/9 Design control — primary reference Naval Ship Engineering Center Philadelphia Division Submarine Antenna Quality Assurance |
NSN 5305-01-134-0724 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-134-0724: Width Across Flats: 0.500 INCHES NOMINAL IN; Head Height: 0.616 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN; Fastener Length: 1.690 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN; Thread Length: 1.000 INCHES MINIMUM IN. 14 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.