The Screw,machine, cataloged under National Stock Number 5305-01-134-0710, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 18 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-134-0710 |
| Item Name | Screw,machine |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Extended Washer Thickness | 0.028 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN |
| Head Height | 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN |
| Screw Surface Treatment | CADMIUM AND CHROMATE |
| Fastener Length | 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN |
| Screw Material Document and Classification | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE |
| Extended Washer Diameter | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Thread Length | 0.343 INCHES MINIMUM AND 0.407 INCHES MAXIMUM IN |
| Nominal Thread Diameter | 0.250 INCHES IN |
| Head Style | ROUND EXTENDED WASHER |
| Thread Direction | RIGHT-HAND |
| Screw Material | STEEL COMP 4037 OR STEEL COMP 8630 |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | CROSS RECESS TYPE 1 |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 28 |
| Thread Series Designator | UNF |
| Head Diameter | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN |
| Screw Surface Treatment Document and Classification | QQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| S5009-416R8 | C/1 Advisory reference — outside the item-of-supply concept Northrop Grumman Systems Corporation |
| S5009-416R8 | 3/9 Design control — primary reference Northrop Grumman Systems Corporation |
NSN 5305-01-134-0710 is a Screw,machine, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-134-0710: Extended Washer Thickness: 0.028 INCHES MINIMUM AND 0.033 INCHES MAXIMUM IN; Head Height: 0.096 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN; Screw Surface Treatment: CADMIUM AND CHROMATE; Fastener Length: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM IN. 18 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.