PartsTable TECHNICAL DATA SHEET
NSN 5305-01-132-1040Government record, cited

Screw, Machine5305-01-132-1040

NSN 5305-01-132-1040 · NIIN 011321040 · Part number MS9564-15
Sae International Dba Sae International · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 0U583
Government record, cited
NSN 5305-01-132-1040 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-132-1040. Manufacturer of record part number: MS9564-15.
Also searched as  5305-01-132-1040 · 5305011321040 · NIIN 011321040 · 01-132-1040 · FSC 5305 Screws · CAGE 0U583 · MS9564-15
Nearby stock numbers  ·
Features
  • Screw,machine — FSC 5305
  • Extended Washer Thickness: 0.030 INCHES MINIMUM IN
  • Head Height: 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
  • Fastener Length: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
  • Screw Material Document and Classification: AMS55731 ASSN STD SINGLE MATERIAL RESPONSE
  • Extended Washer Diameter: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
  • Thread Length: 0.568 INCHES MINIMUM AND 0.648 INCHES MAXIMUM IN
  • Hardness Rating: 24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
Identification
  • NSN: 5305-01-132-1040
  • NIIN: 011321040
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: MS9564-15
  • Manufacturer: Sae International Dba Sae International
General Description

The Screw,machine, cataloged under National Stock Number 5305-01-132-1040, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Sae International Dba Sae International. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-132-1040
Primary Part NumberMS9564-15
Item NameScrew,machine
FSC / FSG5305 / 53 — Screws
ManufacturerSae International Dba Sae International
StatusACTIVE
Extended Washer Thickness0.030 INCHES MINIMUM IN
Head Height0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN
Fastener Length1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN
Screw Material Document and ClassificationAMS55731 ASSN STD SINGLE MATERIAL RESPONSE
Extended Washer Diameter0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
Thread Length0.568 INCHES MINIMUM AND 0.648 INCHES MAXIMUM IN
Hardness Rating24.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
Nominal Thread Diameter0.164 INCHES IN
Head StyleDOUBLE HEXAGON W/ HOLE
Thread DirectionRIGHT-HAND
Width Between Flats0.219 INCHES NOMINAL IN
Screw MaterialIRON ALLOY 660
Minimum Tensile Strength130000 POUNDS PER SQUARE INCH LBS
Thread Class3A A
Thread Quantity Per Inch36
Hole Quantity4
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Head Hole Configuration StyleDOUBLE HEXAGON LONGITUDINAL HOLE
Hole Diameter0.047 INCHES NOMINAL IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
MS9564-15 PRIMARY Sae International Dba Sae International (USA)
Reference documents
ReferenceMeaning
MS9564-15 5/9 Secondary reference
U.S. Government activity
MS9564-15 3/9 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-132-1040?

NSN 5305-01-132-1040 is a Screw,machine, manufactured by Sae International Dba Sae International, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-132-1040?

NSN 5305-01-132-1040 has 1 manufacturer part number on file: MS9564-15 (Sae International Dba Sae International).

What are the specifications of MS9564-15?

Key specifications for MS9564-15: Extended Washer Thickness: 0.030 INCHES MINIMUM IN; Head Height: 0.220 INCHES MINIMUM AND 0.240 INCHES MAXIMUM IN; Fastener Length: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN; Screw Material Document and Classification: AMS55731 ASSN STD SINGLE MATERIAL RESPONSE. 19 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-132-1040 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com