PartsTable TECHNICAL DATA SHEET
NSN 5305-01-132-0510Government record, cited

Screw, Close Tolerance5305-01-132-0510

NSN 5305-01-132-0510 · NIIN 011320510 · Part number LB35-4-14
Hi-Shear Corporation · FSC 5305 — Screws · FSG 53 — Hardware and Abrasives · CAGE 73197
Government record, cited
NSN 5305-01-132-0510 — this item is cataloged by the U.S. Government under National Stock Number 5305-01-132-0510. Manufacturer of record part number: LB35-4-14.
Also searched as  5305-01-132-0510 · 5305011320510 · NIIN 011320510 · 01-132-0510 · FSC 5305 Screws · CAGE 73197 · LB35-4-14 · ST3M791C4-14 · AS301-4-14 · ST3M791C4-14 · 10115301
Nearby stock numbers  ·
Features
  • Screw,close Tolerance — FSC 5305
  • Surface Finish: 63.0 MICROINCHES GRIP
  • Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD
  • Width Across Flats: 0.250 INCHES NOMINAL IN
  • Fastener Length: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
  • Thread Length: 0.344 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
  • Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
  • Material Document and Classification: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-132-0510
  • NIIN: 011320510
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
  • Primary part number: LB35-4-14
  • Manufacturer: Hi-Shear Corporation
General Description

The Screw,close Tolerance, cataloged under National Stock Number 5305-01-132-0510, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 21 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-132-0510
Primary Part NumberLB35-4-14
Item NameScrew,close Tolerance
FSC / FSG5305 / 53 — Screws
ManufacturerHi-Shear Corporation
StatusACTIVE
Surface Finish63.0 MICROINCHES GRIP
Surface Finish63.0 MICROINCHES BEARING SURFACE OF HEAD
Width Across Flats0.250 INCHES NOMINAL IN
Fastener Length1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN
Thread Length0.344 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
Shank Unthreaded Hole Diameter0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.250 INCHES IN
Head StyleFLAT COUNTERSUNK
Thread DirectionRIGHT-HAND
Grip Length0.875 INCHES MINIMUM AND 0.891 INCHES MAXIMUM IN
Grip Diameter0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM IN
Surface TreatmentPASSIVATE OVERALL
Internal Drive StyleHEXAGON
Countersink Angle100.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch28
MaterialSTEEL COMP XM-13 OVERALL
Thread Series DesignatorUNIFIED NATIONAL JOINT FINE (UNJF)
Distance From Head Largest Bearing Surface to Shank Hole Center1.266 INCHES NOMINAL FIRST HOLE IN
Head Diameter0.502 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
ST3M791C4-14 The Boeing Company Div Defense (USA)
LB35-4-14 PRIMARY Hi-Shear Corporation (USA)
Reference documents
ReferenceMeaning
AS301-4-14 5/2 Secondary reference
U.S. Government activity
ST3M791C4-14 5/2 Secondary reference
U.S. Government activity
10115301 6/9 Informative reference only
Nimikkeistokeskus Ncb Finland
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-132-0510?

NSN 5305-01-132-0510 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.

What part numbers are listed for NSN 5305-01-132-0510?

NSN 5305-01-132-0510 has 2 manufacturer part numbers on file: ST3M791C4-14 (The Boeing Company Div Defense), LB35-4-14 (Hi-Shear Corporation).

What are the specifications of LB35-4-14?

Key specifications for LB35-4-14: Surface Finish: 63.0 MICROINCHES GRIP; Surface Finish: 63.0 MICROINCHES BEARING SURFACE OF HEAD; Width Across Flats: 0.250 INCHES NOMINAL IN; Fastener Length: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM IN. 21 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-132-0510 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com