The Screw,close Tolerance, cataloged under National Stock Number 5305-01-128-5120, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. The manufacturer of record is Hi-Shear Corporation. Government technical data includes 19 specifications, cited from the U.S. Government catalog. The record lists 2 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 9 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-128-5120 |
| Primary Part Number | HT4048-5D-13 |
| Item Name | Screw,close Tolerance |
| FSC / FSG | 5305 / 53 — Screws |
| Manufacturer | Hi-Shear Corporation |
| Status | ACTIVE |
| Fastener Length | 1.172 INCHES MINIMUM AND 1.202 INCHES MAXIMUM IN |
| Thread Length | 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN |
| Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN |
| Material Document and Classification | 23-112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.312 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Grip Length | 0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM IN |
| Grip Diameter | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN |
| Surface Treatment | PASSIVATE OVERALL |
| Minimum Tensile Strength | 125000 POUNDS PER SQUARE INCH LBS |
| Internal Drive Style | HIGH-TORQUE |
| Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 24 |
| Material | STEEL CORROSION RESISTING OVERALL |
| Thread Series Designator | UNIFIED NATIONAL JOINT FINE (UNJF) |
| Distance From Head Largest Bearing Surface to Shank Hole Center | 1.049 INCHES MINIMUM AND 1.089 INCHES MAXIMUM FIRST HOLE IN |
| Head Diameter | 0.429 INCHES MINIMUM AND 0.477 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| HT4048-5D-13 PRIMARY | Hi-Shear Corporation (USA) |
| ST3M713-5D13 | Sps Technologies, Llc Dba PB Fasteners (USA) |
| Reference | Meaning |
|---|---|
| HT4048-5D-13 | 5/2 Secondary reference U.S. Government activity |
| HT4048-5D-13 | 5/9 Secondary reference Sps Technologies, Llc Dba PB Fasteners |
| HT4048-5D-13 | 5/9 Secondary reference U.S. Government activity |
| ST3M713-5D13 | 5/2 Secondary reference U.S. Government activity |
| HT4048-5D-13 | C/1 Advisory reference — outside the item-of-supply concept Huck International, Inc |
| HT4048-5D-13 | C/1 Advisory reference — outside the item-of-supply concept Howmet Global Fastening Systems Inc |
| 10115169 | 6/9 Informative reference only Nimikkeistokeskus Ncb Finland |
| ST3M713-5D13 | 7/2 Vendor item drawing reference The Boeing Company Div Defense |
| HT4048-5D-13 | 5/9 Secondary reference U.S. Government activity |
NSN 5305-01-128-5120 is a Screw,close Tolerance, manufactured by Hi-Shear Corporation, classified under FSC 5305, Screws. Status: active.
NSN 5305-01-128-5120 has 2 manufacturer part numbers on file: HT4048-5D-13 (Hi-Shear Corporation), ST3M713-5D13 (Sps Technologies, Llc Dba PB Fasteners).
Key specifications for HT4048-5D-13: Fastener Length: 1.172 INCHES MINIMUM AND 1.202 INCHES MAXIMUM IN; Thread Length: 0.350 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN; Shank Unthreaded Hole Diameter: 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE IN; Material Document and Classification: 23-112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL. 19 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.