The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-128-1578, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 16 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 5305-01-128-1578 |
| Item Name | Screw,cap,socket Head |
| FSC / FSG | 5305 / 53 — Screws |
| Status | ACTIVE |
| Width Across Flats | 0.078 INCHES NOMINAL IN |
| Fastener Length | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| Surface Treatment Document and Classification | MIL-C-13924 CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| Thread Length | 0.186 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN |
| Material Document and Classification | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| Nominal Thread Diameter | 0.138 INCHES IN |
| Head Style | FLAT COUNTERSUNK |
| Thread Direction | RIGHT-HAND |
| Surface Treatment | OXIDE OVERALL |
| Internal Drive Style | HEXAGON |
| Countersink Angle | 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM |
| Thread Class | 3A A |
| Thread Quantity Per Inch | 32 |
| Material | STEEL COMP 316 OVERALL |
| Thread Series Designator | UNIFIED NATIONAL COARSE (UNC) |
| Head Diameter | 0.263 INCHES MINIMUM AND 0.307 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 592-4758537-8 | 3/2 Design control — primary reference U.S. Government activity |
| 592-475837 | 3/9 Design control — primary reference Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier |
NSN 5305-01-128-1578 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.
Key specifications for 5305-01-128-1578: Width Across Flats: 0.078 INCHES NOMINAL IN; Fastener Length: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN; Surface Treatment Document and Classification: MIL-C-13924 CLASS 4 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL; Thread Length: 0.186 INCHES MINIMUM AND 0.278 INCHES MAXIMUM IN. 16 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.