PartsTable TECHNICAL DATA SHEET
NSN 5305-01-126-8805Government record, cited

Screw, Cap, Socket Head5305-01-126-8805

NSN 5305-01-126-8805 · NIIN 011268805
FSC 5305 — Screws · FSG 53 — Hardware and Abrasives
Government record, cited
Also searched as  5305-01-126-8805 · 5305011268805 · NIIN 011268805 · 01-126-8805 · FSC 5305 Screws · ABC5758-4 · 918357-6C · 918357-6C · 918357-6V · 918357-6C
Nearby stock numbers  ·
Features
  • Screw,cap,socket Head — FSC 5305
  • Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD
  • Width Across Flats: 0.1094 INCHES MINIMUM AND 0.1111 INCHES MAXIMUM IN
  • Fastener Length: 1.009 INCHES NOMINAL IN
  • Surface Treatment Document and Classification: QQ-P-35 TY 1 OR TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
  • Thread Length: 0.790 INCHES MINIMUM IN
  • Shank Unthreaded Hole Diameter: 0.0390 INCHES MINIMUM AND 0.0405 INCHES MAXIMUM FIRST HOLE IN
  • Material Document and Classification: AMS 5732 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5643 ASSN STD 2ND MATERIAL RESPONSE OVERALL
Identification
  • NSN: 5305-01-126-8805
  • NIIN: 011268805
  • FSC: 5305 — Screws
  • FSG: 53 — Hardware and Abrasives
General Description

The Screw,cap,socket Head, cataloged under National Stock Number 5305-01-126-8805, is classified within Federal Supply Class 5305 (Screws) of the Hardware and Abrasives group. Government technical data includes 20 specifications, cited from the U.S. Government catalog. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN5305-01-126-8805
Item NameScrew,cap,socket Head
FSC / FSG5305 / 53 — Screws
StatusACTIVE
Surface Finish32.0 MICROINCHES BEARING SURFACE OF HEAD
Width Across Flats0.1094 INCHES MINIMUM AND 0.1111 INCHES MAXIMUM IN
Fastener Length1.009 INCHES NOMINAL IN
Surface Treatment Document and ClassificationQQ-P-35 TY 1 OR TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Thread Length0.790 INCHES MINIMUM IN
Shank Unthreaded Hole Diameter0.0390 INCHES MINIMUM AND 0.0405 INCHES MAXIMUM FIRST HOLE IN
Material Document and ClassificationAMS 5732 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5643 ASSN STD 2ND MATERIAL RESPONSE OVERALL
Nominal Thread Diameter0.138 INCHES IN
Head StyleOVAL COUNTERSUNK
Thread DirectionRIGHT-HAND
Surface TreatmentPASSIVATE OVERALL
Minimum Tensile Strength160000 POUNDS PER SQUARE INCH LBS
Internal Drive StyleHEXAGON
Countersink Angle30.0 DEGREES NOMINAL
Thread Class3A A
Thread Quantity Per Inch32
MaterialIRON ALLOY 660 OVERALL
Thread Series DesignatorUNJC
Distance From Head Largest Bearing Surface to Shank Hole Center0.919 INCHES NOMINAL FIRST HOLE IN
Head Diameter0.198 INCHES MINIMUM AND 0.202 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
ABC5758-4 3/2 Design control — primary reference
U.S. Government activity
918357-6C 7/2 Vendor item drawing reference
U.S. Government activity
918357-6C 3/2 Design control — primary reference
U.S. Government activity
918357-6V 5/2 Secondary reference
U.S. Government activity
918357-6C 5/2 Secondary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-0094
SCREW,CLOSE TOLERANCE
5305-00-000-1397
5305-00-000-1397 · Item name not on file
5305-00-000-2625
5305-00-000-2625 · Item name not on file
5305-00-000-3669
5305-00-000-3669 · Item name not on file
5305-00-000-3830
5305-00-000-3830 · Item name not on file
5305-00-000-3831
5305-00-000-3831 · Item name not on file

Frequently Asked Questions

What is NSN 5305-01-126-8805?

NSN 5305-01-126-8805 is a Screw,cap,socket Head, classified under FSC 5305, Screws. Status: active.

What are the specifications of 5305-01-126-8805?

Key specifications for 5305-01-126-8805: Surface Finish: 32.0 MICROINCHES BEARING SURFACE OF HEAD; Width Across Flats: 0.1094 INCHES MINIMUM AND 0.1111 INCHES MAXIMUM IN; Fastener Length: 1.009 INCHES NOMINAL IN; Surface Treatment Document and Classification: QQ-P-35 TY 1 OR TY 2 OR TY 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL. 20 specifications are documented in the U.S. Government catalog.

Is NSN 5305-01-126-8805 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com